Base Frame Assembly; Overview Components - Bernina Q 24 Manual

Required parts and tools:
• Allen key no. 6 (T1)
• Tape measure (not included in the scope of delivery)
Prerequisite:
• The optimal leg length is determined.
> Undo the two locking screws on each leg.
– The two leg segments can be moved against one another.
> Move the lower leg segment until it reaches the leg length determined.
> Tighten the locking screws.

2.5 Base frame assembly

Overview components

The following figures show the most important pre-assembled parts and components for quilting frame
assembly.
3
2
1
1 Rail support, left
2 Legs, left
3 Legs, center
a
a
4 Legs, right
5 Rail support, right
Quilting frame assembly
4
5
15