Bernina Q 24 Manual page 24

Quilting frame assembly
> Move the inserted slot nuts in such a way that there are the same number of slot nuts to the right and
Attaching the front cross bar to the right and left leg
Carry out the following tasks on both sides.
> Place one serrated washer (W5) onto each of two head cap screws (S11).
> On the upper longitudinal bar, push one head cap screw into the top front borehole from the outside.
> Guide the screw into the lateral edge of the cross bar and tighten it (see page 13).
> Guide the second head cap screw through the lower borehole and secure it in the lateral edge of the
Attaching the front cross bar to the central leg
> Attach one slot nut (SN1) each in the lower slot of the cross bar to the right and the left of the
22
the left of the central leg.
cross bar.
longitudinal bar.