Quilting frame assembly
> Insert the rear cross bar into the slot of the right leg in such a way that the upper edges of the rear cross
bar and the right-hand longitudinal bar are at the same height.
Attaching the rear cross bar to the right and left leg
Carry out the following tasks on both sides.
> Attach a slot nut (SN1) to the top edge of the cross bar. (see page 12)
> Check to ensure that the cross bar and longitudinal bar are at the same height.
> If necessary, align the rear cross bar.
> Tighten the screw. (see page 13)
> Attach a slot nut (SN1) to the bottom edge of the cross bar.
20