Bernina Q 24 Manual page 42

Quilting frame assembly
Overview of assembly
P15
P3
P6
P7
P1
P16 P5
Important notes on the stand profiles
Both stand profiles have a round hole on one side and a slotted opening on the other side for attaching the
V-wheels. The slotted opening allows the V-wheels to be subsequently aligned, so that they rest perfectly on
the tracks of the carriage. Please therefore make sure that the slotted opening on both stand profiles is on
the same side of the machine after assembly.
The front stand profile differs from the rear stand profile due to a plastic stud on the underside, i.e. the stand
profile with the plastic stud must be fitted at the front of the machine.
40
P13
P11 P8 P14 P16
P12
P16 P10
P12
P4
P2
P9 P16