Overview Of Small Parts - Bernina Q 24 Manual

My BERNINA

1.6 Overview of small parts

All small parts such as screws, nuts, washers, etc. that are required for assembly of the standard quilting
frame can be found in cardboard box 2.
The parts are packaged in bags or boxes. We recommend unpacking all parts and then sorting them based
on type. You can use the following tables to check the scope of delivery.
For identification purposes, each part has a code that is included in the list of parts required for the
respective task in the assembly instructions.
Note: The number of items included with the small and the large quilting frame can differ from the details
provided in the following tables. The differences are listed in the appendix. (see page 64)
All rights reserved: Changes with regard to the equipment of the machine can be made at any time and
without advance notice for technical reasons and for the purpose of improving the product. The accessories
supplied can also be subject to changes, depending on the country of delivery.
Figure Number
9
3
1
2
1
16
4
10
2
8
Designation
Head cap screw, M8×40
Head cap screw, M8×50
Countersunk screw, M5×10
Head cap screw, M8×50
Countersunk screw, M4×45,
black
Head cap screw, M4×16
Button head screw, M5×12
Countersunk screw, M8×14,
black
Button head screw, M6×12
Code Tool
S1 Allen key no. 6
S2 Torx T30 screwdriver
S3 Allen key no. 3
S4 Allen key no. 5
S5 Allen key no. 3
S6 Allen key no. 3
S7 Allen key no. 3
S8 Allen key no. 5
S9 Torx T30 screwdriver
Use
Rail support assembly (8 pcs)
Carriage alignment (1 pc.)
Attaching the lower cross bar
Attaching the Take-up rail
Assembling the Top rail
Carriage alignment
Track assembly
Attaching the storage trays
Positioning tabletops (8 pcs)
Attaching the dead bar (2
pcs)
Carriage alignment