Attaching The Storage Trays - Bernina Q 24 Manual

> Fix the bungee cord (M16) in the bracket.
> Fit the remaining side clamps in the same way.

Attaching the storage trays

Required parts and tools:
• 2× storage trays (M2)
• 4× button head screws M5x12 (S7)
• Allen key no. 3 (T1)
Two slot nuts are pre-fitted in the slot below the brackets of the side clamps.
Carry out the following tasks on both sides.
> Hold the storage tray (M2) in front of the slot.
> Slide the two pre-fitted slot nuts so that they are behind the holes on the storage tray.
> Insert two button head screws (S7) into the holes on the storage tray and tighten them.
Quilting frame assembly
59