Top And Backing Rail Assembly - Bernina Q 24 Manual

> To ensure that the carriage later rests optimally on the tracks, pull the track outwards and then tighten all
head cap screws (S6).
> Screw in one button head self-tapping screw (S12) on each of the two sides of the track.

2.10 Top and backing rail assembly

The top rail and backing rail are fitted to the rail supports at the front.
3
2
1
1 Support, top rail
3 Support, take-up rail
NOTICE! Leaders are already fitted in some of the following images. In these assembly instructions,
attaching the leaders is only described later. Always attach the rails without leaders.
Quilting frame assembly
3
2
1
2 Support, backing rail
31