Quilting Frame Assembly; Unpacking And Checking The Delivery; Recurring Steps; Fitting The Slot Nuts - Bernina Q 24 Manual

Quilting frame assembly

2

2.1 Unpacking and checking the delivery

> Open the packaging and unpack the individual parts.
> Check the individual parts for damage.
> Check that the delivery is complete.
> If parts are missing or if you have any questions about the assembly, contact your specialist BERNINA

2.2 Recurring steps

The following instructions describe steps that you need to perform repeatedly during assembly of the quilting
frame. These steps are not described in detail each time in the assembly instructions.

Fitting the slot nuts

Slot nuts can be used to securely connect the components of the base frame to one another. A set of slot
nuts (SN1) comprises the slot nut that fits into the slot on the component, a serrated washer and a screw.
> Unscrew the screw from the slot nut.
> Insert the slot nut into the slot near the joint. Ensure that the spring is inside and that the thread can be
> Use the Allen key to slide the slot nut in the slot so that it comes to rest precisely behind the borehole on
> Place the washer onto the screw.
12
Quilting frame assembly
dealer immediately.
seen from the outside.
the counterpart.