Assembling The Top Rail - Bernina Q 24 Manual

Quilting frame assembly

Assembling the top rail

Required parts and tools:
• Top rail
• Ratchet wheel (M7)
• 2× head cap screws M8×50 (S4)
• Allen key no. 2 and no. 6 (T1)
> Push the ratchet wheel (M7) over the right-hand end of the top rail so that the teeth are pointing
> Hold the top rail and inner bar with the pre-fitted plastic cap precisely in front of the screw hole on the
> Insert the head cap screw (S4) through the screw hole and tighten it.
> Repeat the last two steps on the left-hand side.
> Push the ratchet wheel (M7) under the pawl as close as possible to the rail support. However, the ratchet
32
forward when viewed from the front of the quilting frame.
lower rail bracket of the right-hand rail support.
wheel must not brush against the rail support.