Positioning The Machine On The Carriage - Bernina Q 24 Manual

Quilting frame assembly

Positioning the machine on the carriage

Risk of injury from improper transport
CAUTION
Risk of injury and damage to the machine.
> Position the machine on the carriage with the help of another person.
> Leave the machine in the park position until the dead bar and take-up rail have been fitted.
Required parts and tools:
• Machine with stand profiles fitted
• 4x lateral cover caps (M13)
• Allen key no. 4 (T1)
> Position the machine on the carriage with the help of another person.
> Check to ensure that the machine can be moved freely along the entire length of the carriage and that
> If necessary, readjust the position of the V-wheel units (P16) and then tighten the screws.
> Attach the lateral cover caps (M13) to the ends of the stand profiles.
46
all wheels are in contact with the carriage at all times.