Attaching Safety Brackets - Bernina Q 24 Manual

> Carefully push the machine up to the left-hand rail support and into the park position.

Attaching safety brackets

The machine is secured from tipping over with two types of safety brackets:
• Y safety brackets secure the machine on the carriage and are fitted to the machine's stand profiles.
• X safety brackets secure the carriage on the quilting frame and are fitted to the carriage.
Attaching Y safety brackets
Attach the four Y safety brackets to the two stand profiles of the machine on both sides.
Required parts and tools:
• 4× Y safety brackets (M14)
• 4× washers 5.3/10×1 (W6)
• 4× head cap screws Torx M5×16 (S10)
• 4× hex nuts M5 (N2)
• Torx screwdriver (T25)
• Open-ended wrench no. 8 (T2)
> Guide one head cap screw (S10) with washer attached (W6) through the borehole behind the rail in the
stand profile from above.
> Push one Y safety bracket (M14), with the slot facing upward, over the screw from below.
Quilting frame assembly
47