Replacing Carriage Plate (Unit) - Bernina Deco 330 Manual

Deco 330
1
4

Replacing Carriage Plate (Unit)

2
3
4
5
To remove:
1 Turn the power switch "ON" and select the pattern No.1.
2 Turn the power switch "OFF" and remove the Cover
cap 1 . (Unlock the hook from the inside.)
3 Turn the power switch "ON" to return the carriage to
the home position.
4 Remove Screws 4 (3 pieces) and remove the
carriage plate.
To attach:
5 Attach the carriage plate (unit) and tighten screws
temporarily.
6 Adjust the carriage plate position so that its top surface
is parallel and the same level with the bed surface.
Tighten the screws securely.
7 Attach the cover cap 1 .
1
Cover cap
2 Hook
3
Drop plate
4 Screws
5
Arm surface
25