Restoring A Disk Image - Siemens SINUMERIK 840D sl Commissioning Manual

Backing up and restoring data

5.7 Restoring a disk image

5.7 Restoring a disk image
If your system is no longer functioning stably, you can restore it with a disk image.
Note
Restoring replaces all current files
When you restore the PCU from a disk image, all programs, settings, and files are
completely replaced by the disk image. You cannot restore individual files or exclude
individual files from restoration.
Precondition
A disk image exists
See: Creating a disk image (Page 64)
Procedure
To restore a disk image, proceed as follows:
1. Start the Service Center, for example, via the boot selection, which you can display with
F12 during booting.
2. In the main menu of the Service Centers, click "Disk Restore."
The "Disk Restore" dialog box opens.
Figure 5-6
68
See also: Starting the Service Center (Page 57)
Service Center - Disk Restore
Commissioning Manual, 03/2013, 6FC5397-1DP40-3BA1
PCU Base Software (IM10)