Part 3: Upgrading And Replacing Hardware - IBM Aptiva Handbook

Upgrading and replacing hardware
This part contains information to help you add to or
change the hardware that was installed in your Aptiva
computer at the factory. It contains the following
chapters:
•
"Chapter 5: Before you unplug and open the
tower" on page 55
This chapter contains information to help you plan
and prepare to add or replace adapter cards, drives,
and system board components in your tower. It
includes instructions for preventing and preparing
for possible resource conflicts and instructions for
removing the cover from the tower.
•
"Chapter 6: Working with system board
components" on page 63
This chapter contains instructions for working with
the hardware components on your system board.
•
"Chapter 7: Working with adapter cards and
drives" on page 77
This chapter contains instructions for working with
adapter cards and drives.
Part 3
53