IBM Aptiva Handbook page 121

Table 3: Troubleshooting: Hardware problems
If the problem is:
Audio CD does not play when inserted into
CD-ROM drive.
Note: If any of these problems continue after taking the actions listed, see your online Aptiva Helper for information on running
diagnostics. If you need service, see the HelpWare book.
Here's what to do:
Make sure you have enabled AutoPlay. To enable AutoPlay, follow these steps:
1. From the Windows 95 desktop, double-click on the My Computer icon.
2. In the My Computer window, double-click on the Control Panel folder.
3. In the Control Panel window, double-click on the System icon.
4. In the System Properties window, click on the Device Manager tab.
5. Double-click on the CD-ROM list item and then double-click on the listed
CD-ROM option.
6. In the Properties window, click on the Settings tab.
7. Under Options, click on the Auto insert notification check box to add a
check to the box.
8. Click on OK.
Note: If you enable AutoPlay, then Standby and Automatic Power Off might
not work properly.
Solving hardware problems 105