Chapter 2. Replacing Hardware; Removing The Computer Cover - IBM Types 8122 Replacement Manual

Chapter 2. Replacing hardware

Note: Use only the parts provided by IBM.

Removing the computer cover

1. Remove any media (diskettes, CDs, or tapes) from the drives, shut down your
2. Unplug all power cords from electrical outlets.
3. Disconnect all cables attached to the computer. This includes power cords,
4. Remove any locking devices such as a padlock or Kensington lock that secure
5. Press the cover-release button on the right side cover, slide the cover to the
© Copyright IBM Corp. 2005
Attention:
Do not remove the computer cover or attempt any repair before reading the "Important
safety information" in the Quick Reference that was included with your computer or in the
Hardware Maintenance Manual (HMM) for the computer. To obtain copies of the Quick
Reference or HMM, go to http://www.ibm.com/pc/support.
Important
Turn off the computer and wait 3 to 5 minutes to let the computer cool
before removing the computer cover.
operating system, and turn off all attached devices.
input/output (I/O) cables, and any other cables that are connected to the
computer. See "Locating controls and connectors on the front of the computer"
on page 2 and "Locating connectors on the rear of the computer" on page 3.
the computer cover.
rear, and remove.
5