IBM Aptiva Handbook page 20

•
"Chapter 3: Understanding the Rapid Resume
features" on page 21
This chapter provides instructions for finding the
Rapid Resume Manager on your Windows 95
desktop and describes each of the Rapid Resume
features.
•
"Chapter 4: Viewing and changing Aptiva
configuration" on page 31
This chapter provides instructions for using the
Setup Utility, where you can view or change your
system's configuration. It also provides information
to help you locate other configuration utilities.
"Part 3: Upgrading and replacing hardware" on
page 53
This part contains information to help you add to or
change the hardware that was installed in your
computer at the factory. It contains the following
chapters:
•
"Chapter 5: Before you unplug and open the tower"
on page 55
This chapter contains information to help you plan
and prepare to add or replace adapter cards, drives,
and system board components in your tower. It
includes instructions for preventing and preparing
for possible resource conflicts and instructions for
removing the cover from the tower.
4 Chapter 1: Using this book
•
"Chapter 6: Working with system board
components" on page 63
This chapter contains instructions for working with
the hardware components on your system board.
•
"Chapter 7: Working with adapter cards and drives"
on page 77
This chapter contains instructions for working with
adapter cards and drives.
"Part 4: Troubleshooting" on page 97
This part contains information to help you respond to
problems with the hardware, software, and features
installed in your computer at the factory. It contains the
following chapter:
•
"Chapter 8: Diagnosing and recovering from
problems" on page 99
This chapter provides troubleshooting information,
including error code interpretations. It also includes
information to help you recover factory installed
programs and files.