Removing The Waste Toner Container - Canon imageRUNNER ADVANCE 8105 Series Service Manual

4
Parts Replacement and Clearning > Image Formation System > Removing the Waste Toner Container

Removing the Waste Toner Container

1) Remove the Right Rear Lower Cover.
• 1 Screw
2) Remove the Waste Toner Container.
MEMO:
In the case of toner spill when removing the Waste Toner Container, be sure to wipe out
the spilled toner.
After the Waste Toner Container is removed, be sure to cover the Waste Toner
Container with the Cap attached in the side.
When the Waste Toner Container is removed outside the machine, be sure to promptly
cover with the Cap to prevent toner scattering.
4
Parts Replacement and Clearning > Image Formation System > Removing the Waste Toner Container
F-4-203
F-4-204
<Processing when replacing the parts>
1) Set a new Waste Toner Container.
2) Clear the waste toner counter.(COPIER>FUNCTION>CLEAR>W-TN-CLR)
4-141
4-141