REP 11.5.2 STM PWB (SCC)
Parts List on PL 11.5
Removal
To avoid personal injury or electrical shock, ensure that the machine is completely off
before disassembling or adjusting. Turn OFF the power and unplug the machine.
1.
Remove the STM Rear Cover (PL 11.5).
2.
Remove the STM PWB (Figure 1).
1 Disconnect the connectors (3).
2 Remove the screws (2).
3 Remove the STM PWB.
Initial Issue
WorkCentre 5020
WARNING
Figure 1
Replacement
1.
To install, do the removal steps in reverse order.
July, 2007
4-91
Repairs and Adjustments
REP 11.5.2