REP 2.2.1 Tray 1 Feed Clutch (SCC)
Parts List on PL 2.2
Removal
To avoid personal injury or electrical shock, ensure that the machine is completely off
before disassembling or adjusting. Turn OFF the power and unplug the machine.
1.
Remove the Rear Cover (REP 9.2.1).
2.
Disconnect the connector (Figure 1).
1 Disconnect the connector.
2 Release the wire harness from the clamp.
Initial Issue
WorkCentre 5020
WARNING
Figure 1
3.
Remove the screws (3) that secure the Clutch Bracket (Figure 2).
1 Remove the screws (3).
July, 2007
4-7
Figure 2
Repairs and Adjustments
REP 2.2.1