Xerox WorkCentre 5020 Service Documentation page 33

Error
Code Error Name/Explanation/I/O Diagnostic Codes/Check Items
Error Name
No Response from USB-Host
Explanation
• Either "USB disconnected" or "Communication timed-out" is detected during a print job.
N4-0
• Or, either "USB disconnected" or "Communication timed-out" is detected during a scan job.
Check Items
• Cancel the print job.
• Reconnect the USB cable correctly.
Error Name
HBPL or XPJL Syntax Error
Explanation
An abnormal command that cannot be ignored is received from the USB-Host during a print job.
N4-1
Check Items
• Cancel the print job.
• Reconnect the USB cable correctly.
Error Name
Download File Error
Explanation
N4-2
There is an abnormal Product ID or there is a checksum error in the download file.
Check Items
Press the [Stop] button on the Control Panel.
Error Name
Download Flash Write Error
Explanation
N4-3
Unable to write the downloaded file into flash memory.
Check Items
Press the [Stop] button on the Control Panel.
Error Name
CPM Image Lost
Explanation
E0-1
During a copy job in CPM Priority Mode, the paper containing an image cannot be output after the image is deleted.
Check Items
Press the [Stop] button on the Control Panel.
Error Name
Push Scan TimeOut
Explanation
• Push scan notification failed during a scan job.
N5-0
• Or, there is no scan job request from the PC after a push scan notification.
Check Items
The error will clear itself after a set amount of time has passed.
Initial Issue
WorkCentre 5020
July, 2007
2-21
Record in
Error Log RAP BSD
CH3.2
O -
Figure 2
CH3.2
O -
Figure 2
-
-
O - -
O - -
Status Indicator RAPS