Gp1 Serial Number Locations - Xerox WorkCentre 5020 Service Documentation

GP1 Serial Number Locations

The Serial Number is located in three places on the machine:
NOTE: If the Rear cover has to be replaced, do not worry about saving the data plate (which
has the machine serial number), since the serial number can be found in two other locations.
• On the Data Plate on the Rear Cover.
• In software on the machine. The serial number can be displayed by accessing Diagnos-
tics (How to Enter the Diagnostic Mode) and entering NVM code [25-20].
• On a bar code sticker at the left rear of the machine, which can be seen by opening the
Left Side Cover and looking toward the back.
Initial Issue
WorkCentre 5020
July, 2007
6-31
General Procedures
GP1