Xerox WorkCentre 5020 Service Documentation page 96

6. Remove the Transfer Corotron Housing (Figure 1).
1 Release the hooks (2).
2 Remove the Transfer Corotron Housing by pulling its front side in the direction of the
arrow.
Repairs and Adjustments
REP 4.3.1
Figure 1
7. Remove the Tapping Screws that secure the Corotron Block (Figure 2).
1 Remove the Tapping Screws (2).
2 Move the Fuser Connector Bracket.
3 Remove the Tapping Screw.
July, 2007
4-24
Figure 2
Initial Issue
WorkCentre 5020