Rep 5.1.1 Fuser (Scc) - Xerox WorkCentre 5020 Service Documentation

REP 5.1.1 Fuser (SCC)

Parts List on PL 5.1
Removal
To avoid personal injury or electrical shock, ensure that the machine is completely off
before disassembling or adjusting. Turn OFF the power and unplug the machine.
The Fuser and Exit Transport are hot. Do not work on them until they are cool enough.
1. Open the Left Side Cover.
2. Remove the Connector Cover (Figure 1).
1 Remove the Tapping Screw.
2 Remove the Connector Cover.
Initial Issue
WorkCentre 5020
WARNING
WARNING
Figure 1
3. Disconnect the connectors (Figure 2).
1 Disconnect the connectors (2).
July, 2007
4-29
Figure 2
Repairs and Adjustments
REP 5.1.1