Log: Loading List Of The Programs - Siemens SINUMERIK 840D Operator's Manual

4
Machine Operating Area
4.6 Automatic mode
Execute fr.
hard disk

4.6.4 Log: Loading list of the programs

Program
overview
Log
4-144
If a program requires more memory than the NC can provide for
execution, then it can be executed from the hard disk without loading
it completely into the NC.
Other information
Workpieces/part programs that have been loaded to the NC memory
are marked with ("X") in the "Loaded" column in the workpiece/
program overview.
Function
·
Error list:
Display of previously loaded programs if errors have occurred
during loading.
Operating sequence
The "Machine" operating area is selected.
The "Program overview" is open.
The softkey bars change.
Select softkey "Log".
The "Job log for program overview" is opened.
SINUMERIK 840D/840Di/810D Operator's Guide HMI Advanced (BAD) – 03.04 Edition
4
03.04
Ó Siemens AG, 2004. All rights reserved