Siemens SINUMERIK 840D Operator's Manual page 195

5
03.04
WTy
Geo – Len 1
Radius ...
Ó Siemens AG, 2004. All rights reserved
SINUMERIK 840D/840Di/810D Operator's Guide HMI Advanced (BAD) – 03.04 Edition
Tool type
Only some of the tool offsets are enabled for input, depending on the
tool type.
All other tool types are preset to a value of 0.
Tool offsets such as length, radius, wear, monitoring data, etc.
"Parameters" Operating Area
5.3 Tool management
5
5-195