Program Relationship In The Dual Editor (From Sw 6.4); Views In The Dual Ascii Editor; Synchronized View In The Dual Ascii Editor - Siemens SINUMERIK 840D Operator's Manual

6
"Program" Operating Area

6.7 Program relationship in the dual editor (from SW 6.4)

Find/Go
to...
6.7 Program relationship in the dual editor (from SW 6.4)

6.7.1 Views in the dual ASCII editor

Find/Go
to...

6.7.2 Synchronized view in the dual ASCII editor

Find/Go
to...
6-302
Find: If the search term is located in the step identifier, the cursor is
positioned on the step. If the search term is not found within a step, a
message is displayed "Search text not found".
Go to: If the block number is located within a step, the cursor is
positioned on the main level or sublevel of the step.
If you are positioned on a subroutine call in the ASCII editor, this
View
subroutine
program is loaded to the second editor when you press the "View
subroutine" softkey.
The function is only available in the ASCII editor.
You can view instruction groups in the ASCII editor. Position the
Synchr.
wait markers
cursor on a Wait marker instruction in one of the two ASCII editors.
Press the softkey "Synchr. wait markers". This string is searched in
the second editor and displayed at the same height in the window with
the cursor positioned in the first editor. The focus remains in the first
editor. If no wait marker instruction is found together with its brackets,
the next wait marker instruction is displayed in the adjacent window
regardless of the brackets.
SINUMERIK 840D/840Di/810D Operator's Guide HMI Advanced (BAD) – 03.04 Edition
6
03.04
Ó Siemens AG, 2004. All rights reserved