Siemens SINUMERIK 840D Operator's Manual page 33

Hmi advanced

Hide thumbs Also See for SINUMERIK 840D:

Table of Contents

Hardkeys on the MF II

SINUMERIK 840D/840Di/810D Operator's Guide HMI Advanced (BAD) – 03.04 Edition

Additional note

Since the English version of Windows is used in the control, the

keyboard language is English. A different keyboard language cannot

The following keys, assigned in the hotkey pad on operator panels

OP010 and OP010C, are located on the MF II keyboard in the

alpha/numeric keypad with NumLock off:

· HOME (Pos1)

Hotkeys on operator panels OP 010 and OP010C

Direct access

to the Program operating area

The Parameters operating area

is where the last tool offsets are directly called.

Direct access to Program overview

to show the last selected program management.

In the Diagnostics operating area, the last alarms,

messages, service displays or PLC status can be called.

Can be configured by the customer.

Direct access

to the Machine operating area.

Direct access to the last selected operating area:

Machine, Parameters, Program, Services, Diagnostics or

Operator Components/Sequence of Operations

2.1 Operator panels

PROGRAM MANAGER

Chapters

Table of Contents

Sinumerik 840di Sinumerik 810d