Cleaning - Siemens SINUMERIK 840D Operator's Manual

10
03.04
10.2

Cleaning

Cleaning agents
Plastic material used
Ó Siemens AG, 2004. All rights reserved
SINUMERIK 840D/840Di/810D Operator's Guide HMI Advanced (BAD) – 03.04 Edition
The front of the monitor and the surface of the operator panel front
can be cleaned. For dirt that is relatively easy to remove, standard
household washing-up liquid, or an industrial cleaner (such as
"Special Swipe") can be used. These cleaners will also remove dirt
containing graphite.
Cleansing agents which contain one or more of the following
ingredients can be used for a short period of time:
· Diluted mineral acids
· Bases
· Organic hydrocarbons
· Detergent solutions
The plastic material used on the front of the OP015, OP012 or OP015
is suitable for use on machine tools.
It is resistant to:
1. Greases, oils, mineral oils
2. Bases and lyes
3. Detergent solutions and
4. Alcohol
Solvents such as chlorinate hydrocarbons, benzene, esters and
ethers should be avoided!
10
Maintenance
10.2 Cleaning
10-461
n