Description
2.13 Measuring cycle help programs
2.13
Measuring cycle help programs
2.13.1
CYCLE116: Calculation of center point and radius of a circle
Function
This cycle calculates from three or four points positioned on one plane the circle they inscribe
with center point and radius.
To allow this cycle to be used as universally as possible, its data is transferred via a parameter
list.
An array of REAL variables of length 13 must be transferred as the parameter.
Figure 2-12
Programming
CYCLE116 (_CAL[ ], _MODE)
52
Calculation of circle data from 4 points
Programming Manual, 12/2017, 6FC5398-4BP40-6BA1
Measuring cycles