Selecting/Creating Operand Screens For Plc Status - Siemens SINUMERIK 840D Operator's Manual

8
"Diagnosis" Operating Area

8.5 Selecting/creating operand screens for PLC status

8.5 Selecting/creating operand screens for PLC status
Diagnosis
or
PLC
File
functions
Delete
Save
Load
Error
log
Editor
8-432
Function
You can save the operands entered in the "PLC status" window to a
file or read in a back-up list of operands.
Operating sequence
The operating area The operating area "Start-up" is selected.
Start-
up
Select softkey "PLC".
The horizontal and vertical softkey bars change.
Select softkey "File functions".
The vertical softkey bar changes.
Enter the name of the file in which you wish to save the operands.
You can select existing back-up files from a list.
All the following functions refer to the file name entered:
The selected operand back-up file is deleted.
The selected operands are saved to the specified file.
The selected operand file is loaded to the "PLC status" window for
processing.
If errors occur during transfer of the machine data, these are entered
in an error log.
The error log is transfer-specific, i.e. it is cleared before each new
transfer.
The ASCII editor is called with the selected file.
You can now edit the operand back-up file.
SINUMERIK 840D/840Di/810D Operator's Guide HMI Advanced (BAD) – 03.04 Edition
8
03.04
Ó Siemens AG, 2004. All rights reserved