Synchronized Display In The Dual-Step Editor - Siemens SINUMERIK 840D Operator's Manual

6
03.04

6.7.3 Synchronized display in the dual-step editor

Synchronized display
Find/Go
to...
Ó Siemens AG, 2004. All rights reserved
SINUMERIK 840D/840Di/810D Operator's Guide HMI Advanced (BAD) – 03.04 Edition
6.7 Program relationship in the dual editor (from SW 6.4)
Here two programs are loaded in the step editor and displayed side by
side. Both these programs are searched for synchronization points,
and the points are displayed at the same level.
All sychronization marks that are to be synchronized in the step
display must be stored in a SEDITOR.INI file.
In the standard file SEDITOR.INI (directory \hmi_adv) the entries for
the standard wait markers are already specified in the section
SyncMarks_Siemens.
"Program" Operating Area
6
6-303