Siemens SINUMERIK 840D Operator's Manual page 413

8
03.04
Service
displays
Service
SI
Axis
+
Axis
-
Direct
selection...
SGE/SGA
SPL
Ó Siemens AG, 2004. All rights reserved
SINUMERIK 840D/840Di/810D Operator's Guide HMI Advanced (BAD) – 03.04 Edition
Active stop
Currently requested external stop
Stop F code value (alarm 300911)
Pulse enabled
Traversing disable via stop in other axis
Operating sequence
Select the menu headed "Service displays".
The horizontal softkey bars change.
The "Service SI" window displays information about Safety Integrated
data together with the associated axis name and axis number.
You can page up and down with the "Page" keys.
The service values of the next (+) and the previous (-) axis are
displayed.
An axis can be directly selected from the available axes.
Use this softkey to display the safety-relevant input and output signals
SGE and SGA.
Use this softkey to display the safe programmable logic signals SPL.
"Diagnosis" Operating Area
8.3 Service display
8
8-413