5
03.04
Symbols
/
5.3.4 Grinding parameters extension in SW 6.2 or later
Ó Siemens AG, 2004. All rights reserved
SINUMERIK 840D/840Di/810D Operator's Guide HMI Advanced (BAD) – 03.04 Edition
The G56 reset value is TOWWCS
$SC_WEAR_TRANSFORM is set.
The current tool for channel "REV2" is indicated in row 6. The current
value of G56 on channel "REV2" is the same as the reset value (
Row 15 displays the current tool for channel "HAND". Here, the
current value of G56 deviates from the G56 reset value (
Other information
Additional information can be found in
/FBW/, Description of Functions Tool Management
Function
If the selected tool is a grinding tool, a vertical softkey 6 "Grinding
data" is provided in the following:
· Tool details basic screen
· Tool details cutting edge data (secondary) screen
· Tool details monitoring data (secondary) screen
"Parameters" Operating Area
5.3 Tool management
/
and
5
).
).
5-207