Siemens SINUMERIK 840D Operator's Manual page 407

8
03.04
Acknowledge symbols
Ó Siemens AG, 2004. All rights reserved
SINUMERIK 840D/840Di/810D Operator's Guide HMI Advanced (BAD) – 03.04 Edition
8.2 Alarms/messages/alarm log
The following acknowledge symbols apply to the MMC and PLC
alarms:
(MMC alarms correspond to HMI alarms).
HMI/MMC alarms:
PLC alarms:
Safety alarms S:
Safety alarms SQ:
The SQ alarms are cleared with softkey "Acknowledge SQ alarm".
The S alarms are display alarms, they do not have to be cleared. The
way S and SQ alarms are displayed depends on the settings in the
files "MMC.INI" and "MBDDE.INI".
You can determine which acknowledgment symbol is to be displayed
for the PLC alarms by an entry in the INI file "DG.INI".
The following symbols are available:
PLC alarms:
Activation of the symbols is described in
/IAM/, IM4, Installation and Start-Up Guide HMI/MMC
"Diagnosis" Operating Area
MMC
P LC
SQ
P LC
or
8
8-407