Automatic Mode; Function And Main Screen - Siemens SINUMERIK 840D Operator's Manual

4
Machine Operating Area

4.6 Automatic mode

4.6 Automatic mode

4.6.1 Function and main screen

Preconditions
Explanation of basic
display
4-140
You can execute part programs fully automatically in "Automatic"
mode, i.e. this mode is normally used for machining parts.
The following conditions must be fulfilled before you can execute part
programs:
· You have already synchronized the control measuring system with
the machine (i.e. "approached" reference points).
· You have already downloaded the associated part program to the
control.
· You have checked or entered the necessary offset values, such as
work offsets or tool offsets.
· The required safety interlocks are already active.
The "Automatic" basic display contains values relating to position,
feedrate, spindle and tool as well as the block currently being
processed or program pointer.
Machine
Channel reset
MCS Position
-X 53.761 mm
+ X 900.000 mm 0.000
+X900.000mm0.000
- Y -156.000 mm 0.000
+Y 30.000 mm
-Y-156.000mm0.000
+ Z 230.000 mm 0.000
+Z230.000mm0.000 +Z 112.704 mm
+ 0.000 mm
Current block TEST.MPF
N51 Y0 H55=99
Y120 F7000
Over- DRF
store offset
Like the Jog display, the Automatic display contains actual value,
spindle window, feedrate and tool windows.
SINUMERIK 840D/840Di/810D Operator's Guide HMI Advanced (BAD) – 03.04 Edition
\WKS.DIR\TEST.MPF
Auto
Program aborted
Dist.-to-go
Master spindle
Act. +
-25.761
Set
0.000
Pos
-112.704
0.000
Power [%]
Feedrate mm/min
Act. 7000.000 0.000 %
Set 7000.000
Tool
preselected tool:
G0 G91
Program Block Handwheel
control search
Ó Siemens AG, 2004. All rights reserved
4
03.04
G fct.
transf.
Auxiliary
func.
S1
0.000 rpm
Spindles
0.000 rpm
0.000 deg.
Axis
0.000 %
feedrate
Program
blocks
Zoom
act. val.
Act. val.
WCS
Program
level
Program
overview