Table of Contents
Advertisement
REASSEMBLY, REPAIR AND ADJUSTMENT
FUJICA AX -1
12. Viewfinder
1 2 - 1 Installing eyepiece assembly (6-6)
o
Install the eyepiece assembly (5 - 6) on the camera body with two screws
(5 - 5).
o
Check the eyepiece shutter assembly (5 - 9) to insure that it operates
smoothly.
12-2 Adjustment of focusing
o
Assemble the penta prism (2 -18) with the prism case assembly (2 - 20)
temporarily, and make sure that the split images seen in the viewfinder
are matched.
o
When adjustment is required, adjust thickness of the washers (3 - 57 and
3 - 58).
o
When adjusting, lightly hold (about 100 grams) the penta prism (2-18).
o
When proper washers are selected, secure them with Pliobond.
o
When adjusting the focusing, mount an Fl.6/55 mm lens.
- 8 6 -
Hide quick links:
Advertisement
Table of Contents
