Table of Contents
Advertisement
REASSEMBLY, REPAIR AND ADJUSTMENT
FUJICA AX - 1
10 - 4 Typical examples of trouble and probable causes
a.
Approximately 15 msec. are counted at 1/1000 sec.
Cause: o Coil of
b.
Shutter blind does not open.
Cause: o Coil of
Corrective action:
c.
Both the 1st and 2nd blinds do not run.
Cause;
d.
1/1000 sec. shutter speed fluctuates.
Cause: o Insufficient attracting forces of
e.
The 1st blind opens when wound up rapidly.
Cause:
magnet (for 1st blind) is broken or attracting force
of the
magnet is insufficient.
magnet (for 2nd blind) is broken or attracting force
of the
magnet is insufficient.
o
Insufficient claw engagement.
o To recover attracting force of the magnet, clean the
attracted piece.
o Set shutter speed to "B" to move the iron core to
the attracting position, and with the shutter speed
"B" maintained, retighten the set screw.
o
magnet does not operate.
o
Improper position of the slop lever (5 - 159)
o Relase tever (5 - 163) does not operate.
o
insuffucuent holding forces of
o Attracted piece is not fixed securely.
o
Insufficient engagement of 1st blind hook and improper height.
o Release lever (5 - 163) of the magnet moves when winding up
the shutter blind.
- 8 2 -
and
magnets.
and
magnets.
Hide quick links:
Advertisement
Table of Contents
