FujiFilm Fujica AX-1 Repair Manual And Part List page 31

REASSEMBLY, REPAIR AND ADJUSTMENT
FUJICA A X - 1
1- 12 Installing base plate assembly (6 - 2)
a. Apply Helicolube - Molycote mixed grease to the shaft holder portions of
the base plate assembly.
b. Exercise care for positions of the ratchet wheel assembly (6 - 37), lever
assembly (6 - 69) and charge lever assembly (6 - 40).
c. Combine the lever (6-36), spring (6-35) and ratchet wheel (6-39) so
that the lever is caused to engage with the detent of the ratchet wheel
by the spring.
d. Make sure that the lever (6 -10) is away from the stopper (6 - 48).
e. Matching the shaft holder portions, install the base plate assembly (6 - 2)
with three screws (6 - 28) and screw (6 - 29).
f. Release the lever (6 -10) to the position where it comes into contact with
the stopper (6 - 48).
- 2 8 -