Table of Contents
Advertisement
REASSEMBLY, REPAIR AND ADJUSTMENT
FUJICA AX -1
h.
Install two gears (6 - 101) with two spring pins (6 -100).
i.
Install two ratchet gears (6 - 75) on the shutter blind spindles after applying
Pliobond so that they will not be dropped off.
j.
Apply the click spring (6-79) to the screw (5-78), and hold the ratchet geat
(5-76) with the screw (5-78). Now, install the E-clip (5-77) to secure the
click spring (5 - 79).
k.
Turn the two ratchet gears (5 - 75) counterclockwise to provide the 1st and 2nd
shutter blinds with a light tension.
1.
With the metal fixture (5-32) of the 1st blind matched with the positioning
hole of the light shielding plate (5-27), hold the gear (5-101), and install the
1st shutter blind gear assembly (5 - 90) in the position shown in the right hand
figure.
m. Install the stop lever assembly (5 - 112), and apply Helicolube - Molycote mixed
grease to the sliding surface and washer (5 - 111).
n.
Loosen two screws (5-91) and finely adjust position of the metal fixture (5-32).
When position of the metal fixture is adjusted completely, apply Pliobond to the
screws to lock them and retighten the screws securely.
- 4 4 -
Hide quick links:
Advertisement
Table of Contents
