Table of Contents
Advertisement
REASSEMBLY, REPAIR AND ADJUSTMENT
FUJJCA A X - 1
1 - 9
Installing charge lever assembly (6 - 40)
a.
Apply Helicolube - Molycote mixed grease to the shaft portion.
b.
Move the sprocket to set the cam to the position shown in the right
hand figure.
c.
Install the charge lever assembly (6 - 40).
d.
Move the sprocket and move the gear assembly (6-47) until it stops.
1 -10 Installing ratchet wheel assembly (6-37)
a.
Apply Helicolube - Molycote mixed grease to the shaft and gear portions.
b.
Install the ratchet wheel assembly (6 - 37) so that the marking hole is
positioned in the side as shown in the right hand figure.
1 -11 Installing release lever (6 - 55)
a.
Install the release lever (6 - 55) in the position shown in the right hand
figure.
b.
Note that this lever is required to release the rewind lock not from the
film advance lever side but from an Auto - Winder combined with the
camera.
- 2 6 -
Hide quick links:
Advertisement
Table of Contents
