Friction Of Take - Up Spool; Friction Of Rewind Spindle Assembly - FujiFilm Fujica AX-1 Repair Manual And Part List

REASSEMBLY, REPAIR AND ADJUSTMENT
FUJICA AX -1
1 - 2

Friction of take - up spool

a. The rated friction is 220 to 300 grams.
To check friction, wind a piece of string around the spool (6-93), turn
the film advance lever and measure actually effective torque at the tame
when the spool slips.
b. To adjust friction, adjust bent diameter of the friction ring (6 - 91).
c. Apply Losoid grease 72510 between the friction plate (6 - 91) and collar
(6 - 92).
d. Make sure that the spool turns toward both the forward and backward
directions.
NOTE:
1 - 3

Friction of rewind spindle assembly (6 -107)

a. The rated friction is 10 to 60 gr - cm. When adjustment is required,
properly change shape of the click spring (6 - 108).
b. When installing the friction spring (6 -108), be careful not to deform it.
c. Apply Losoid grease 72510 to the sliding surface and groove of the rewind
spindle (6-111).
Spool becomes abnormally heavy when the collar (6-76) of the
take - up spindle assembly (6-74) is not positioned correctly
with the collar (6-76) assembled with the friction plate (6-91).
- 1 8 -