Reassembly And Adjustment Of Parts Relative To The Camera Body; Film Chamber Door Lock - FujiFilm Fujica AX-1 Repair Manual And Part List

REASSEMBLY, REPAIR AND ADJUSTMENT
FUJICA A X - 1
1.

Reassembly and adjustment of parts relative to the camera body

1 -1

Film chamber door lock

a. Check the pin (6 -102) to insure that it is caulked on the camera body
(6 - 88) securely.
b. Check the lock plate (€ -106) to insure that it has been installed securely
with two screws (6 -10&).
Make sure that two square openings on the lock plate (6 -106) with which
the lock plate is guided are properly lubricated with Helicolube - Molycote
mixed grease.
c. Check the leaf spring (6-112) and lock plate (6 -106) to insure that their
contact surfaces are lubricated properly with Helicolube - Molycote mixed
grease.
d. Check the lock plate (6 -106) to insure that the head of the lock plate is
on the step of the light shielding barrel (6 - 110).
e. Pull the rewind spindle (6-111), and make sure that the lock plate (6-106)
moves smoothly.
f. Check the hook plate (3-4) of the film chamber door to insure that it is
correctly guided by the pin (6 -102) so that the film chamber door engages
with the lock plate (6 -106) smoothly with a snap without deforming the
film chamber door.
- 1 6 -