DISASSEMBLY
FUJICA AX -1
4.
Lens mount base assembly (3-54)
a.
Remove the amplifier assembly (2 -13),
b.
Remove four screws (3 - 50).
c.
Disconnect lead wires (7-23 and 7-24) extended from the M-circuit board
assembly (2-64), and remove the lens mount base assembly.
5.
Mirror case assembly (4-10)
a.
Remove four screws (3 - 47), and disassemble the lens mount base assembly (3 - 54).
b.
Remove four screws (3 - 51).
c.
Remove two screws (3 - 55), and remove the mirror case assembly.
- 1 0 -