Focal Plane Shutter Assembly - FujiFilm Fujica AX-1 Repair Manual And Part List

REASSEMBLY, REPAIR AND ADJUSTMENT
FUJICA A X - 1
3.

Focal plane shutter assembly (5-20)

a. Place the focal plane shutter assembly (5 - 20) into the camera body from the
bottom of the camera body.
NOTE: Be careful not to raise the light shielding plate (6 - 98).
b. Install the focal plane shutter assembly with three screws (5 - 72).
c. With care exercised on the direction of the notch, install the notched gear
(5-67).
d. Combine the collar (5 - 68) with the seat plate (5 - 69), and install them with
the clutch (5-70) tightly on the focal plane shutter assembly.
e. Install the cover plate (6-71) with Pliobond.
NOTE: When loosening the clutch (5 - 70), wind up the film advance lever in
a half way, hold the sprocket, and loosen the clutch.
If the clutch is loosened without winding the film advance lever in a
half way, the claw portion of the lever (6-51) may be damaged.
f. Release the charge lever assembly (6 - 40), wind up the film advance lever, and
make sure that the shutter blinds are wound up.
g. When the shutter blinds are wound up completely, make sure that the notched
gear (5 - 67) disengages permitting the shutter blinds to return the original
positions.
- 4 0 -