Displays In Viewfinder And Lcd - FujiFilm KLASSE W Owner's Manual

Displays in Viewfinder and LCD

Displays in the viewfinder
Lit
Correctly focused
Focus mark
The flash will fire.
Flash mark
Shutter speed
The manual-focus
mode is selected.
LCD
The film is not loaded correctly.
Film counter
The distance to the subject is too close.
Distance to the
subject
Out of the exposure interlocking range
The AF lock is in use with the
(When the camera is turned off and then on while selecting the film sensitivity mode,)
the film sensitivity mode is in a manual mode.
Slow blinking
The picture is out of focus.
The subject is not suitable for the AF mode;
thus, the AF mode is not working. Use the AF
lock feature to position the AF frame onto an
object whose distance and brightness are best
for the subject you wish to take. ( P.30, 32)
It is too bright and overexposed.
Select the flash-off mode ( P.46) or make
more distance from the subject.
The shutter speed is too slow. It may cause
camera shake.
―
AFL
button.
When pressing the shutter button half way
The distance to the subject is too close.
You need to have a distance of 0.3m or more
when using KLASSE W and 0.4m or more for
KLASSE S to fit the subject into the AF frame.
The distance displayed on the LCD also
blinks.
The flash is charging.
The shutter button cannot be pressed. Wait
until the charge of the flash completes.
Out of the exposure interlocking range.
The AF lock is in use with the
Blinking
Load the film again, making sure it is loaded properly.
You need to have a distance of 0.3m or more when using
KLASSE W and 0.4m or more for KLASSE S to fit the subject
into the AF frame.
Reduce the AEB compensation amount. When using the
aperture AE mode, change the aperture.
Check the film sensitivity setting before photographing.
Fast blinking
AFL
button.
77