FujiFilm Fujica AX-1 Repair Manual And Part List page 124

INSPECTION POINT
2. Parts related to camera
body
2 - 1 Film advance
2 - 2 Film rewind button
2 - 3 Filming system and
film chamber door
2 - 4 Exposure counter
3. Viewfinder
3 - 1 Coincidence of
infinity
3 - 2 Viewfinder
condition
METHOD OF INSPECTION
o Make sure that the film advance lever can be
wound up smoothly.
o Make sure that the film advance lever returns
with a proper resistance.
o Make sure that so called inching can be made
when winding up the film advance lever.
Make sure that the sprocket is freed when this
button is depressed. Wind up the film advance
lever and make sure that the film rewind button
resets causing the sprocket to operate.
o Load a test film, repeat film advancing and
make sure that the film can be advanced
correctly. Further, make sure that the film
can be rewound correctly.
o Make sure that the film chamber door can be
opened, closed and locked correctly with a
Sim loaded.
o Make sure that the film chamber door can
be installed and removed.
o Close the film chamber door, wind up the
film advance lever and make sure that the
exposure counter operates normally from "S'\
o Open the film chamber door, and make sure
that the exposure counter resets to "S".
Set the focusing ring of the lens to
an object in a long distance, and make sure
that the split images are matched.
A slight overage is permitted but shortage should
never exist.
o Make sure that no dust, scar or others which
hinder view through the viewfinder exist.
o Make sure that the viewfinder frame is
positioned correctly and is not deformed.
- 1 2 1 -
INSPECTION
FUJICA A X - 1
REMARKS
, look at