Replacing the battery
Removing the battery
1
Select the "L" mode and turn the screws.
2
Press and hold both ends of the camera to release
and remove the cover.
3
Pull out the wiring, remove the connector, and pull
the battery out.
• Dispose of the battery according to the instructions of the
discharge cooperation store and local government.
3
Installing the battery
1
Insert the replacement battery into the camera.
2
Connect the connector.
3
Place the cover on the camera and secure it with
screws.
• For information on obtaining replacement batteries, contact the
service center listed on the separate sheet.
• The battery is a dedicated item for "INSTAX Pal."