Combi P7: Arp/Dt (Arpeggiator/Drum Track); 7-1: Setup T01-08, 7-2: Setup T09-16 - Korg Krome Parameter Manual

COMBI P7: ARP/DT (Arpeggiator/Drum Track)

These parameters specify how the arpeggiator will function
within the combination. Two arpeggiators can run
simultaneously.
This offers a variety of possibilities, such as applying
separate arpeggio patterns to two sounds that have been
assigned as a keyboard split, or using velocity to switch
between two arpeggio patterns.
7–1: Setup T01–08,
7–2: Setup T09–16
7–1a
7–1b
7–1c
7–1(2)a: Combination Name, Tempo
Combination Name
For more information, please see "2–1(2)a: Combination
Name, Tempo" on page 79.
(Tempo)
For more information, please see " (Tempo)" on page 71.
7–1(2)b: Timbre Info
Selected Timbre Info
For more information, please see "Selected Timbre Info" on
page 71.
7–1(2)c: Arpeggiator Assign,
Arpeggiator Run
Arpeggiator Assign
Assigns arpeggiator A or B to each timbre 1–8 and 9–16.
When the ARP button is on, the arpeggiator specified for
each timbre will operate according to Arpeggiator Run A, B
and these settings.
Off: The arpeggiator will not operate.
A: Arpeggiator A will operate. Use the settings in the
Arpeggiator A page to select the arpeggio pattern and to set
parameters.
B: Arpeggiator B will operate. Use the settings in the
Arpeggiator B page to select the arpeggio pattern and to set
parameters.
If the Status (Combi 3–1(2)c) of the timbre is INT, each
timbre 1–16 will be sounded by the note data generated
by the assigned arpeggiator, regardless of the MIDI
Channel (Combi 3–1(2)c) setting of the timbre. If a
timbre is set to EXT or EX2, MIDI note data will be
transmitted on the MIDI Channel of that timbre.
In this case, arpeggiator A (or B) will be triggered
(operated) by all MIDI channels specified for the MIDI
COMBI P7: ARP/DT (Arpeggiator/Drum Track) 7–1: Setup T01–08, 7–2: Setup T09–16
7–1
Menu
[040.00...300.00, EXT]
[Off, A, B]
Channel parameter of any timbre 1–16 assigned to
arpeggiator A or B.
If Local Control (Local Control On, Global P1: 1–1a) is
OFF, the keyboard will not trigger the arpeggiator.The
arpeggiator will be triggered via MIDI IN. Turn Local
Control OFF if you have recorded only the trigger notes
on an external sequencer, and wish to playback the
external sequencer to trigger the KROME's arpeggiator.
If you want to record the note data generated by the
arpeggiator to an external sequencer, turn Local
Control ON, and turn off the echo back function on
your external sequencer.
You can control the arpeggiator from an external
sequencer, or use an external sequencer to record
arpeggio note data. (See page 367)
Example 1)
Set the MIDI Channel (Combi 3–1(2)c) of timbres 1 and 2
to Gch, and set Status (Combi 3–1(2)c) to INT. Assign
arpeggiator A to timbre 1 and arpeggiator B to timbre 2,
and check Arpeggiator Run A, B (Combi 0–5(6)a).
• When the ARP button is off, timbres 1 and 2 will sound
simultaneously (layered) when you play the keyboard.
• When the ARP button is turned on, timbre 1 will be
played by arpeggiator A, and timbre 2 will be played by
arpeggiator B.
Arpeggiator
Assign
Trigger Arpeggiator Pattern - A
A
= Gch
A
B
Arpeggiator
Trigger
Pattern - B
= Gch B
Example 2)
The MIDI Channel (Combi 3–1(2)c) of timbres 1, 2, 3, 4,
and 5 are set respectively to Gch, Gch, 02, Gch, and 03.
Their Status (Combi 3–1(2)c) is set respectively to INT,
Off, INT, Off, and INT. Assign arpeggiator A to timbres
2 and 3, assign arpeggiator B to timbres 4 and 5, and
check Arpeggiator Run A, B (Combi 0–5(6)a).
• When the ARP button is off, playing the keyboard will
sound only timbre 1. (Timbres 2 and 4 are receiving the
Gch, but they will not sound since their Status is Off.)
• When you turn on the ARP button, arpeggiator A will
play timbres 2 and 3, and arpeggiator B will
independently play timbres 4 and 5. (Arpeggiators A and
B are triggered by note data received from any MIDI
channel of an assigned timbre. However, in this example,
they are being triggered from the Gch.)
When you play the keyboard, arpeggiator A will play
timbres 2 and 3, but only timbre 3, whose Status is INT
will sound from the keyboard. Similarly, arpeggiator B
will play timbres 4 and 5, but only timbre 5, whose Sta-
tus is INT will sound from the keyboard.
In this way, you can make settings so that a timbre is
silent when the arpeggiator is off, and sounds only when
the arpeggiator is on.
This type of setting is used in preloaded combinations
which sound the drums only when the arpeggiator is on.
Arpeggiator
Assign
Off
Trigger Arpeggiator Pattern - A
A
= Gch, Ch2 A
A
Pattern - B
Arpeggiator
Trigger B
B
= Gch, Ch3
B
Timbre 1 MIDI Ch=Gch Status=INT Pattern - A
Pattern - B
Timbre 2 MIDI Ch=Gch Status=INT
Timbre 1 MIDI Ch=Gch Status=INT
Sounded by normal
keyboard playing
Timbre 2 MIDI Ch=Gch Status=Off
Does not sound
Timbre 3 MIDI Ch=2ch Status=INT
Pattern - A
Timbre 4 MIDI Ch=Gch Status=Off
Does not sound
Timbre 5 MIDI Ch=3ch Status=INT
Pattern - B
91