Korg Krome Parameter Manual page 359

Controller Assignments
Expression (CC#11)
Expression is a secondary volume control, which you can
use to scale level without affecting the main volume settings
or CC#7 values. For more information, please see
"Expression (CC#11)" on page 348.
FX Control 1 & 2 (CC#s12 & 13)
These assignments are intended for Effect Dynamic
Modulation (Dmod). Note that you'll also need to assign FX
Ctrl1 or 2 to control the desired parameter within the Effect.
MFX Send 1 & 2 (CC#s 93 & 91)
These control the send levels to Master Effects 1 and 2,
respectively.
CC#s 93 and 91 actually control send levels in two different
places: the sends directly from the Program OSC and the
send levels of the last Insert Effect in the chain which
matches the CC's MIDI channel.
JS+Y (CC#01)
This duplicates the function of JS+Y. Whatever JS+Y is
assigned to control, the pedal will control as well.
JS–Y (CC#02)
This duplicates the function of JS–Y. Whatever JS–Y is
assigned to control, the pedal will control as well.
Ribbon (CC#16)
You can use this general‐purpose controller as an AMS or
Dmod source. Note that you'll also need to assign Ribbon
(CC#16) to control the desired parameter within the
Program or Effect.
Value Slider (CC#18)
You can use this general‐purpose controller as an AMS or
Dmod source. Note that you'll also need to assign
ValueSlider (CC#18) to control the desired parameter within
the Program or Effect.
TONE [1]...TONE [4]
USER [1]...USER [4]
Use the pedal to control the effect of knobs 1–4 when the
Realtime Controls is in USER/TONE.
ARP GATE
Use the pedal to control the arpeggiator's Gate.
ARP VELOCITY
Use the pedal to control the arpeggiator's Velocity.
ARP SWING
Use the pedal to control the arpeggiator's Swing.
ARP STEP
Use the pedal to control the arpeggiator's Step.
351